External is the Leak Stop to apply externally on the components of the air conditioning and refrigeration systems. it is suitable for all refrigerant gases, including flammable refrigerant gases, which make the welding very difficult. designed to effectively seal all types of leaks up to 5 mm that occur on the metal and rubber components of the refrigeration systems, EXTERNAL resists to lubricants, additives and refrigerant gases. it resists to temperature changes and can be used indifferently on the high and low pressure side (hot or cold).
Application Seals and Prevents Leaks In Air Conditioning and Refrigeration Systems.
Best Bubbles Fluo is a fast and easy solution to identify leaks in refrigerant lines and components of refrigeration and air conditioning systems, even in situations of limited visibility becoming fluorescent when exposed to UV light.
Super-Dry Ultra is a dehydrating additive to prevent the formation of moisture in Refrigeration and Air Conditioning Systems. Super-Dry Ultra contains special chemical components that improve lubricant stability and prevent the creation of moisture in refrigeration and air conditioning systems.
No-Acid Ultra is a neutralizer able to completely eliminate residues of acid present in the A/C and Refrigeration systems, to prevent compressor burnout.The chemical ingredients of No-Acid Ultra bond to the residues of acid present in the system, and eliminate them. These residues might be caused by refrigerant gas or lubricant breakdown, moisture and compressor burnout. Once introduced inside the system No-Acid Ultra prevents the formation of acid.
COOL_SHOT Ultra is a synthetic catalyst that improves the efficiency of Air Conditioning and Refrigeration Systems, reducing the energy consumption and CO2 emissions. ERRECOM laboratories have been increasing their own ULtra collection: COOL-SHOT Ultra formulation has been actually reduced to only 0.20 fl oz (6ml) by even treating bigger and bigger systems 6 TONS (21 kw). COOL-Shot Ultra is composed of two catalysts and a lubricating agent which enables the air conditioning and refrigeration systems to work at maximum efficiency: only 6 ml of product can eliminate the Oil fouling phenomenon.
Brilliant is a fluorescent UV Leak detector Dye that provides safe, fast and precise detection of small refrigerant gas leaks from A/C and refrigeration systems. Brilliant injected into AC/R system will fluoresce under illumination with a UV lamp wherever there is a refrigerant leak.
Brilliant Remover is a cleaner to remove any trace of leak detector dye.
32 doses of UV Leak Detection Dye
EXTREME WHITE ULTRA Is an essential product specifically formulated to solve all problems related to small refrigerant gas leaks occurring in refrigerant systems with R600 - R290 gas.
EXTREME ULTRA is an ultimate leak sealant that solves all the problems related to small refrigerant gas leaks in AC/R Systems. After more than 4 years of R&D efforts and thousands of tests, ERRECOM projected a 0.20 fl oz (6ml) dose leak stop that can work with all types of refrigerant gases. EXTREME ULTRA 0.20 fl oz (6ml) new formula treats AC/R Systems up to 6 TONS (21 kw). It locates the refrigerant gas leaks and permanently seals them, without reacting to moisture and oxygen. EXTREME ULTRA is a polymer-free solution that repairs leaks up to 0.3 mm.
Compressor burnout acid neutralizer
Acid neutralizer for POE oils
Protect Gel is a special product formulated in gel to protect from the effect of heat the surfaces surrounding the point of contact of the flame used during welding or brazing operations.
- SYRINGE ONLY -
ACID-TEST is an essential product to locate the presence and the formation of acid inside AC/R Systems. The use of ACID-TEST is a very important step in a regular preventative maintenance and provides a fast and accurate method to detect the presence of acid into lubricants. ACID-TEST contains chemical ingredients that react when in contact with acidity, changing their color and indicating the normal pH level of the refrigeration lubricant.
EASY-INJECT'S BRAND NEW TECHNOLOGY DOES NOT REQUIRE THE PUMP DOWN OF THE AC/R SYSTEM TO INTRODUCE ADDITIVES IN IT. EASY-INJECT IS A RE-USABLE SPECIAL PLASTIC HOSE WITH A VOLUME OF 0.2 FL OZ (6ML) AND A CHECK VALVE FOR A SAFE USE. IT WILL LAST MULTIPLE DOSES AND IS OPERATOR FRIENDLY.
Seals and Prevents Leaks In Air Conditioning and Refrigeration SystemsEach cartridge treats up to 2 tons of cooling
COMPLETE "PRO" KIT
NEWLY DEVELOPED, This special hose that can be connected directly on one side to the high side port of an AC/R system and on the other side to our injector EASY-INJECT connected to the low side port. By slowly activating the ball valves of EASY-HOSE it will be possible to let the pressure flow from the high-pressure side to the low-pressure side so that it is possible to inject the additive in any AC/R system without needing any manifold.
This kit contains Easy-Inject, which is made with brand new technology and does not require the pump down of the AC/R system to introduce additives in it, and is re-usable. The kit also includes Cool-Shot Ultra. Cool-Shot Ultra is only 0.20 fl oz (6ml). It is a synthetic Catalyst that improves the efficiency of air conditioning and refrigeration systems, reducing the energy consumption and CO2 emissions. ERRECOM laboratories have been increasing their own Ultra collection: COOL-SHOT ULTRA formulation has been actually reduced to only 0.20 fl oz (6ml) by even bigger and bigger systems 6 TONS (21 kw).
COMPLETE KIT 1 TO 6 Tons.
This kit contains Easy-Inject, which is made with brand new technology and does not require the pump down of the AC/R system to introduce additives in it, and is re-usable. The kit also includes Extreme Ultra. Extreme Ultra is an ultimate leak sealant that solves all the problems related to small refrigerant gas leaks in AC/R systems.
A/C Restoring Treatment is the unique complete treatment on the market developed to repair definitively refrigerant gas leaks from air conditioning and refrigeration systems. it is known that the main cause of refrigerant gas leaks in a system is the formation of moisture which causes the formation of acid in the lubricant which- once deposited- starts a slow and constant process of corrosion which will lead to the refrigerant leak. Using the leak stop only you will repair the leak, but it will not stop the chemical process that caused it.