Ratchet Wrench Square 4-in-1
Pinch Off Plier for Refrigeration Copper Tubing
Drain Line 5/8" Water Trap
Brilliant is a fluorescent UV Leak detector Dye that provides safe, fast and precise detection of small refrigerant gas leaks from A/C and refrigeration systems. Brilliant injected into AC/R system will fluoresce under illumination with a UV lamp wherever there is a refrigerant leak.
2 Caps Package for low and high side.
Adapter for R410a systems
Air Conditioner Flush for R134, R12, R410, R404, R507
External is the Leak Stop to apply externally on the components of the air conditioning and refrigeration systems. it is suitable for all refrigerant gases, including flammable refrigerant gases, which make the welding very difficult. designed to effectively seal all types of leaks up to 5 mm that occur on the metal and rubber components of the refrigeration systems, EXTERNAL resists to lubricants, additives and refrigerant gases. it resists to temperature changes and can be used indifferently on the high and low pressure side (hot or cold).
Water safe overflow switch
Application Seals and Prevents Leaks In Air Conditioning and Refrigeration Systems.
Best Bubbles Fluo is a fast and easy solution to identify leaks in refrigerant lines and components of refrigeration and air conditioning systems, even in situations of limited visibility becoming fluorescent when exposed to UV light.
Super-Dry Ultra is a dehydrating additive to prevent the formation of moisture in Refrigeration and Air Conditioning Systems. Super-Dry Ultra contains special chemical components that improve lubricant stability and prevent the creation of moisture in refrigeration and air conditioning systems.
No-Acid Ultra is a neutralizer able to completely eliminate residues of acid present in the A/C and Refrigeration systems, to prevent compressor burnout.The chemical ingredients of No-Acid Ultra bond to the residues of acid present in the system, and eliminate them. These residues might be caused by refrigerant gas or lubricant breakdown, moisture and compressor burnout. Once introduced inside the system No-Acid Ultra prevents the formation of acid.
1/4" SAE reusable push button gauge for multiple uses. Easy to read- color base.
COOL_SHOT Ultra is a synthetic catalyst that improves the efficiency of Air Conditioning and Refrigeration Systems, reducing the energy consumption and CO2 emissions. ERRECOM laboratories have been increasing their own ULtra collection: COOL-SHOT Ultra formulation has been actually reduced to only 0.20 fl oz (6ml) by even treating bigger and bigger systems 6 TONS (21 kw). COOL-Shot Ultra is composed of two catalysts and a lubricating agent which enables the air conditioning and refrigeration systems to work at maximum efficiency: only 6 ml of product can eliminate the Oil fouling phenomenon.
Brilliant Remover is a cleaner to remove any trace of leak detector dye.
Flush Bottle Kit
32 doses of UV Leak Detection Dye
EXTREME WHITE ULTRA Is an essential product specifically formulated to solve all problems related to small refrigerant gas leaks occurring in refrigerant systems with R600 - R290 gas.
EXTREME ULTRA is an ultimate leak sealant that solves all the problems related to small refrigerant gas leaks in AC/R Systems. After more than 4 years of R&D efforts and thousands of tests, ERRECOM projected a 0.20 fl oz (6ml) dose leak stop that can work with all types of refrigerant gases. EXTREME ULTRA 0.20 fl oz (6ml) new formula treats AC/R Systems up to 6 TONS (21 kw). It locates the refrigerant gas leaks and permanently seals them, without reacting to moisture and oxygen. EXTREME ULTRA is a polymer-free solution that repairs leaks up to 0.3 mm.
Compressor burnout acid neutralizer
Acid neutralizer for POE oils
Protect Gel is a special product formulated in gel to protect from the effect of heat the surfaces surrounding the point of contact of the flame used during welding or brazing operations.
- SYRINGE ONLY -
ACID-TEST is an essential product to locate the presence and the formation of acid inside AC/R Systems. The use of ACID-TEST is a very important step in a regular preventative maintenance and provides a fast and accurate method to detect the presence of acid into lubricants. ACID-TEST contains chemical ingredients that react when in contact with acidity, changing their color and indicating the normal pH level of the refrigeration lubricant.